Does the docker container have gpu access for transcoding?

I have bags of davidsons English breakfast and earl grey, both are good

Starting with a consumer NAS is a good spot, they come with a lot of upfront features that are designed to be easier to use for someone who isn’t already familiar with them. I have a synology and it did all the things you describe without issue (other than struggling with transcoding video in real time) and eventually graduated the heavier tasks like media and proper VM hosting to external secondhand mini PCs while still using the NAS as a network drive to store the data. The NAS itself includes docker and an easy to use repository browser that I use for things like pinhole or WLAN controller software, it has an onboard torrent client (which can use RSS and regex to automate downloads), and it has some other light hosting services, which it’s quite capable of. Starting with “just” the NAS and adding external devices as your use case shifts is always an option. Keep in mind that the best way of upgrading a NAS’ storage is leaving a bay open and upgrading disks one by one without having it do a “hard” rebuild from parity data, so 4 bays at least is a good starting point.

If you want to start with just an off the shelf NAS as an all in one device I would recommend making sure it either has or can take additional RAM (no such thing as too much), an NVME cache (more optional but nice) and an intel processor (quicksync transcoding, though the low end cpus will definitely still struggle with trying to turn 4K into 1080 for a stream). I’d be willing to bet most of the consumer NAS devices will all support docker at this point and have similar built in feature sets. Some of the newer models will support onboard 2.5gbe which is nice but probably unnecessary for a single user or family.

External access would be more of a job for your router/firewall which would use PAT to forward connections to your internal network, so that’s outside the scope of your NAS unless you’re building a true all in one box that acts as the central hub of your entire home network.

Most gas stations will sell small gas cans for exactly this reason

Generally higher octane works fine in most cars but high performance engines not configured to handle either type may knock with lower octane fuel (due to premature ignition with the higher compression ratio), and will generally put out (slightly) less power regardless due to timing adjustments the engine will make to accommodate the change.

Putting premium in a regular car that isn’t designed with higher compression ratios in mind is really just a waste of money.

Not software but I once powered off an entire network node by accident, the power distribution was 48v dc and the breaker panel in the rectifier had a retainer bar to hold in the breakers that was abîme the toggles. The toggles did not resist being turned off particularly well and after unscrewing one side of the bar, the whole thing pivoted down, cleanly shutting off every single breaker in the row.

I’ll take it but only if the manufacturer brands it NuGame+

Nothing actually uses classful networking anymore. Any situation where classful network concepts are implemented is necessarily limiting the capabilities of the network. As such it’s completely useless to bother spending time learning it.

There’s nothing inherently important to classful networking you learn that’s necessary for VLSM. They amount to common convention based on subnet size, and even then nearly nobody actually uses A or B sized subnets except as summary routes, which again, is not inherent to classful networking.

Classful networking has been obsolete for thirty years for good reason, you gain nothing from restricting yourself in that way.

Classful networking is well past dead, that’s kinda pointless. Learn VLSM and general subnetting basics instead.

8Hz WAN IP

The 802.11g spot

It’s ok I wasn’t using that soul anyway

“Simple” and “aesthetically pleasing” aren’t mutually exclusive!

The whole point of 2.5 and 5 is to support higher speeds over existing lower-rated cabling so I don’t see the point of multigig fiber connections when 10g fiber runs on the same cables that 1g fiber does

They make make it but it seems silly.