![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.world/pictrs/image/44bf11eb-4336-40eb-9778-e96fc5223124.png)
Prosthetist. I work with patients to make and fit artificial limbs to them.
Prosthetist. I work with patients to make and fit artificial limbs to them.
Lots of good advice here. I’ve got a bunch of older WD Reds still in service (from before the SMR BS). I’ve also had good luck shucking drives from external enclosures as well as decommissioned enterprise drives. If you go that route, depending on your enclosure or power supply in these scenarios you may run into issues with a live 3.3V SATA power pin causing drives to reboot. I’ve never had this issue on mine but it can be fixed with a little kapton tape or a modified SATA adapter. It’s definitely cheaper to shuck or get used enterprise for capacity! I’m running at least a dozen shucked drives right now and they’ve been great for my needs.
Also, if you start reaching the point of going beyond the ports available on your motherboard, do yourself a favor and get a quality HBA card flashed in IT mode to connect your drives. The cheapo 4 port cards I originally tried would have random dropouts in Unraid from time to time. Once I got a good HBA it’s been smooth sailing. It needs to be in IT mode to prevent hardware raid from kicking in so that Unraid can see the individual identifiers of the disks. You can flash it yourself or use an eBay seller like ThArtOfServer who will preflash them to IT mode.
Finally, be aware that expanding your array is a slippery slope. You start with 3 or 4 drives and next thing you know you have a rack and 15+ drive array.
Same, though I’ve got a couple Decepticons sprinkled in. They all connect to the Allspark ssid.
My error, I just checked and apparently it’s actually a Precision. I don’t deal in Dells so I don’t know all their nomenclature! It’s still been a downgrade though from my ThinkPad.
Even on the Windows side of things they’re frustrating. Company took my perfectly working Thinkpad and replaced it last September with an “upgraded” Dell Inspiron laptop. It’s a piece of crap. Wakes up all the time in my bag, randomly drops wifi, and randomly drops ViewSonic monitors. Official IT solution: this happens sometimes, we don’t know why, and we’re going to send you Dell monitors instead.
*Edit I guess it’s actually a Precision, not Inspiron. I don’t buy Dells so I don’t know all the names!
Walking on the Sun by Smash Mouth. I had a radio recording on a cassette tape until my uncle bought me the CD of the album Fush Yu Mang. I was only allowed to listen to that track off of it because my mom deemed the rest of it to not be appropriate. (As an adult, the other tracks were indeed totally inappropriate for a preteen)
Are you in the US? I believe call screen is region limited.
Ditto. I’ve had mine for over a year now with daily use and it’s been great. Good room for tools, and a dedicated outside pocket for glasses. Inner pocket keeps water bottle in place. Organized device storage that holds 2 laptops, an iPad, Steam Deck, Kindle and travel router. The fact that it fits the exact dimensions under most airplane seats has been clutch for travel.
I had to make a warranty claim this week when some of the zipper teeth separated from the bag for some reason. For all the hubbub around the “trust me bro” warranty, support responded within 2 hours and is sending a completely new bag as a replacement. Top notch support.
I’ve been using one for several years now with one of the documented switches that add multiple ports. https://docs.pikvm.org/ezcoo/#connections First in a DIY and then with the v3 hat Kickstarter I guess total I’m at $270 between the Kickstarter HAT and ezcoo switch plus the cost of a Pi (which I already had) I can reach 4 machines over my Tailnet and jump between them reliably. I can also control power on my primary server. (others are on a network managed PDU and can be forcibly reset that way if needed)
I had an old console from a job but it was so old that it required an ancient version of Java to access through the web interface. I’m sure there may be better options, but for my homelab setup the pikvm has worked well at a price that fit in my budget.
Another happy framework user. I have the AMD 13. The modularity allowed me to completely disassemble and clean/save the machine when my wife spilled an entire chai latte on a 1 week old computer. Fan can get a little loud, but the machine just works great and there’s a great community around it.
I’ve had the exact opposite experience historically. Of 5 Seagate drives I’ve purchased over the last decade or so, only 1 of them is still working. Meanwhile 25+ WD hard drives are still in production over the same time with only 1 that started throwing smart errors a couple years back.
Anything I’ve listened to with Ray Porter reading it. His intonation is great and just brings that something extra to the stories. In particular Project Hail Mary and the Bobiverse books. He also did Paradox Bound, which felt like a fine time travel story but his portrayal of the voice of the “faceless men” made the character 's menace come to life for me in a way I don’t think would be captured in text.