I face the same specific issue. I started with the French (Canada) layout years ago but now Windows sets the default to Multilingual/CSA because it has been made the official one by the government a number of years ago.

So now everyone that got used the “old” one has to fiddle with keyboard settings every time they use a new Windows session/computer.

And it’s not exactly a breeze to switch, as Windows often keeps the multilingual one and switches back to it when you use a different application. Gotta make sure to delete the multilingual and leave only one layout. It’s a real annoyance.

It depends what. Plastic recycling is mostly a scam/fraud and does not fix nor change much.

The industry has long known that plastics recycling is not economically or practically viable, the report shows. An internal 1986 report from the trade association the Vinyl Institute noted that “recycling cannot be considered a permanent solid waste solution [to plastics], as it merely prolongs the time until an item is disposed of”.

In 1989, the founding director of the Vinyl Institute told attendees of a trade conference: “Recycling cannot go on indefinitely, and does not solve the solid waste problem.”

Despite this knowledge, the Society of the Plastics Industry established the Plastics Recycling Foundation in 1984, bringing together petrochemical companies and bottlers, and launched a campaign focused on the sector’s commitment to recycling.

In 1988, the trade group rolled out the “chasing arrows” – the widely recognized symbol for recyclable plastic – and began using it on packaging. Experts have long said the symbol is highly misleading, and recently federal regulators have echoed their concerns.

Cited article, and the report’s source

Recycling paper, metal and glass will help and make a difference, keeping in mind that we need to use less in the first place. However plastic recycling is broken by default, pretty much everywhere.

I have no idea. Electricity, heat and hot water are included in my rent.

This thread is giving me flashbacks to the times before Unicode, when swapping files between Windows and Linux partitions would have a good chance of fucking up every non-ASCII characters in their names.

There was ways to set it up so the ISO character sets would match, but it was still a giant pain to deal with different ones.

Blessed be Unicode.

Not in rescue mode. If you can’t mount your root partition because something was fudged in /etc/fstab, for example, you may be stuck in recovery and depending on your distribution, it may not have nano in that minimalist mode.

For me it also happens when I install a VM of Debian using the small image, on my dedicated server in a data center. The company hosting the server requires a special network configuration and AFAIK, there’s only vi. So i need to use the console to access the VM and from there, edit /etc/network/something with vi to setup the network. Once done I can reboot and install the rest of the software over the network, including nano.

I’ve been using Linux for more than two decades. Before nano I was using pico, but it also required to have pine/alpine installed. So knowing the basics of vi has often been helpful over the years for me.

Maybe it’s because I like tinkering with VMs and SBCs, and most people will not encounter situations where they don’t have nano, but it can happen. And you’ll be glad to know at least “i” and “:wq!”.

Sometimes you don’t even have the luxury of nano. Any moderately advanced Linux user should probably learn the basics of vi. Just knowing how to insert text and save it can fix a system that’s stuck in recovery. Even if it’s just to add a comment in front of a line in a config file.

How do you use these when you are connecting via SSH? You enable X forwarding?

It’s fine when you have a graphical environment, but what do you do when you dont have one?

Indeed

It is I that misunderstood the whole thing.

But since we’re here, I use an SSH server app worth about $3 on my phone to access it from other devices with an SFTP or SSHFS client. The app is literally called “SSH Server”. Once the server is active I can use an app like Solid Explorer (free with ads or paying for a license) on another Android device to connect to my phone on the same Wi-Fi network. Or from Windows I can just map a network drive using the format \\sshfs\user@ip. And on Linux just find the “Connect to server” option in your favorite file explorer to use SSHFS. Or any SFTP client of your choice.

I’m not familiar with Wi-Fi Direct since I’ve been using SSH for years now, and certainly much more work this way, but it works okay across all my devices.

EDIT: In my excitement to share a way to do this I didn’t realize you don’t want FOSS or other apps so I deleted my original comment.

EDIT2: See my reply to OP.

Only 10 hours of talking about linux?

I do try to be aware of my water supply. If I’m in a place where water is limited by default, like having a well, or when in a Caribbean country, I’ll be careful as I know others will depend on that source in the very near future. But I live in Canada and from my immediate point of view, the St-Lawrence and the Great Lakes are not going to be dry soon. The only scarcity here is the energy required to pump the water (also provided by water), and its treatment.

And I do understand that our little collective efforts do add up. However, the issues are systemic. Only in a single region of my province (a region!), around 18 corporations and businesses are using more than 75 000 litres a day. We know just because they have to report it past that point. It adds up to billions of litres in a year. For a single region. The provincial government here also allows corporations to just pump the ground water for about $35 CAD by million of litres.

So again, I know that I could make a difference, if we all really tried. But because of the system, and since the pandemic, I’ve lost faith in our societies. I don’t think most people care. While all hiding in our places a few years ago, while the production slowed down, people have seen the changes in nature, the air clean up… and they said fuck it we just want to go back to how it was before.

Just seeing multiple police cars running their engines 24/7 to stalk and bully some oh so dangerous anti-genocide students made me see that any effort to reduce air pollution on my part will be nullified by the system in general. It doesn’t matter if I have car or not, if I recycle plastic while it’s produced in the first place, or if I try to save a few litres of water while Nestlé… sigh.

Sorry but… yeah.

Yes I let it run. Because honestly, I don’t care. People will try make you feel guilty over using water while continuing to make excuses to drive everywhere and why they really need an electric car to “save the planet”. Oh and please recycle while the city that collects the recycling sends it to the dump because this industry is not profitable. And use less water because giant tech companies are going to need it in order to cool and power some more AI servers.

I never owned a car and have driven only once in 40 years. But I know that whatever I do individually to reduce the amount of pollution in the air, it is absolutely useless and pointless. The army or the police will annihilate a lifetime of individual efforts in one day, or even a few hours. I could get a car right now and 90% of people would probably tell me I did the right thing, as a car is sooo useful. No problem as long as it’s electric!

So uuh, I let the water run when I feel like it.

I use them to worsen my personal impact on climate change, since those things are consuming vast quantities of energy. It makes me feel more manly to know that I’m contributing to the slow destruction of our habitat every time I use them. It’s like having a second SUV to go to the closest corner store multiple times a day. These changed my life for the better, made it easier, and I can’t live without them now.

This can also be practical in places where the police can force you to unlock your phone with biometrics but not with the PIN.

Ever since I’ve seen the police here force people to delete the videos of them abusing citizens, I have been very wary of biometric identification.

So far my ‘emergency’ procedure would be to restart my phone, as it’s asking for a PIN after a reboot.

AFAIK Kodi can use pulseaudio and probably pipewire. I use Kodi too on those computers and I just leave it to use the default PA device that I’ve set. I switch the default devices with pasystray.

What’s usually breaking for me is paprefs. Every so often after an upgrade, the options are greyed out and I can’t share or access my devices over the network.

I never tried to setup simultaneous output before because I just switch from device one to another, but I just enabled it in paprefs and it’s working too.

I never noticed any latency when I’m not using bluetooth. And no, the devices do not speak to each other. For PA/pipewire, this is just an audio sink as any other.

There is latency when using bluetooth but this is pretty standard. It just doesn’t increase (or not noticeably) when streamed to another computer.

Bah. I’ve been using Linux for 25 years, started with a derivative of Slackware, then used Slackware for about a decade, and switched to Debian. I used 5.25" floppies and manually set IRQs so I’m quite comfortable with Debian and tinkering in general.

For friends and family I prefer LMDE. Snap packages can go to hell.

Audio over the network is a feature of pulseaudio/pipewire from a module aptly named “module-simple-protocol”, and as simple as it is to make it work on Linux (when it works), it’s unfortunately not as easy on other platforms. Technically speaking, it’s possible to do that on Android with an app called “Simple Protocol Player” but it’s apparently very glitchy and you’re going to need some patience for the setup. It’s from someone that wanted to stream audio from an HTPC with Ubuntu to an Android phone, but the author states that it’s pretty buggy. Here’s the link to their blog: https://kaytat.com/blog/?page_id=301

So the short answer is unfortunately “no”, unless you want to practice your patience on a project.

Hehe, I knew that if I wanted stability I had to stay on Slackware! That’s the price we have to pay to use a bleeding edge distro like Debian where everything is fast paced. 😏